EMC1000T1 | Ethernet to BASE-T1 Media Converter
- Media Converter from Ethernet to BASE-T1
- PC control of Automotive devices
- Configurable IEEE 100/1000BASE-T1 modes
- Configurable PHY registers via Ethernet control
- H-MTD connector for BASE-T1 Ethernet
- RJ45 connector for Gigabit Ethernet
- Status & activity front LEDs
- Description
- DOCUMENTATION
- USE CASE
Description
The Flexmedia XM EMC1000T1 is an Ethernet to 1000BASE-T1 Media Converter module.
The EMC1000T1 Media Converter establishes conversion between automotive ECUs using 1000BASE-T1 (1000 Mbit/s Fullduplex, with 1x Twisted Pair cable) and any Standard Gigabit Ethernet (1 Gbit/s) device with an RJ-45 connector.
In the conversion, no packets are stored or modified. The conversion takes place on the Physical Layer with the highest proven reliability.
*Please note that the Graphical User Interface (GUI) is meant to have a quick hands-on experience of Flexmedia XM module main functions. Full chipset functionality access is guaranteed through Command Line Interface (CLI) programming as well as specific embedded scripting.
Flexmedia EAVB (X64) GUI
1 file(s) 14.04 MB
Login is required to access this page
Flexmedia XM EMC1000T1 – Datasheet
1 file(s) 645 KB
Flexmedia XM Media Converters and AVB Transceiver – Getting Started
1 file(s) 256.49 KB
Login is required to access this page
Flexmedia XM ESC1000T1 – EMC1000T1 – EAVB1000A – User Manual
1 file(s) 1.43 MB
Login is required to access this page
Flexmedia XM EMC1000T1 – CLI
1 file(s) 402.31 KB
Login is required to access this page